roboterarm erte 2.0 version

Firmware 2.0/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

Firmware 2.0/lib/examples/i2c_address_detect/i2c_address_detect.ino

@@ -0,0 +1,21 @@
+#include <Adafruit_I2CDevice.h>
+
+Adafruit_I2CDevice i2c_dev = Adafruit_I2CDevice(0x10);
+
+void setup() {
+  while (!Serial) { delay(10); }
+  Serial.begin(115200);
+  Serial.println("I2C address detection test");
+
+  if (!i2c_dev.begin()) {
+    Serial.print("Did not find device at 0x");
+    Serial.println(i2c_dev.address(), HEX);
+    while (1);
+  }
+  Serial.print("Device found on address 0x");
+  Serial.println(i2c_dev.address(), HEX);
+}
+
+void loop() {
+  
+}

Firmware 2.0/lib/examples/spi_modetest/spi_modetest.ino

@@ -0,0 +1,29 @@
+#include <Adafruit_SPIDevice.h>
+
+#define SPIDEVICE_CS 10
+Adafruit_SPIDevice spi_dev = Adafruit_SPIDevice(SPIDEVICE_CS, 100000, SPI_BITORDER_MSBFIRST, SPI_MODE1);
+//Adafruit_SPIDevice spi_dev = Adafruit_SPIDevice(SPIDEVICE_CS, 13, 12, 11, 100000, SPI_BITORDER_MSBFIRST, SPI_MODE1);
+
+
+void setup() {
+  while (!Serial) { delay(10); }
+  Serial.begin(115200);
+  Serial.println("SPI device mode test");
+
+  if (!spi_dev.begin()) {
+    Serial.println("Could not initialize SPI device");
+    while (1);
+  }
+}
+
+void loop() {
+  Serial.println("\n\nTransfer test");
+  for (uint16_t x=0; x<=0xFF; x++) {
+    uint8_t i = x;   
+    Serial.print("0x"); Serial.print(i, HEX); 
+    spi_dev.read(&i, 1, i);
+    Serial.print("/"); Serial.print(i, HEX);
+    Serial.print(", ");
+    delay(25);
+  }
+}

Firmware 2.0/lib/examples/spi_registers/spi_registers.ino

@@ -0,0 +1,34 @@
+#include <Adafruit_BusIO_Register.h>
+#include <Adafruit_SPIDevice.h>
+
+#define SPIDEVICE_CS 10
+Adafruit_SPIDevice spi_dev = Adafruit_SPIDevice(SPIDEVICE_CS);
+
+void setup() {
+  while (!Serial) { delay(10); }
+  Serial.begin(115200);
+  Serial.println("SPI device register test");
+
+  if (!spi_dev.begin()) {
+    Serial.println("Could not initialize SPI device");
+    while (1);
+  }
+
+  Adafruit_BusIO_Register id_reg = Adafruit_BusIO_Register(&spi_dev, 0x0F, ADDRBIT8_HIGH_TOREAD);
+  uint8_t id;
+  id_reg.read(&id);
+  Serial.print("ID register = 0x"); Serial.println(id, HEX);
+
+  Adafruit_BusIO_Register thresh_reg = Adafruit_BusIO_Register(&spi_dev, 0x0C, ADDRBIT8_HIGH_TOREAD, 2, LSBFIRST);
+  uint16_t thresh;
+  thresh_reg.read(&thresh);
+  Serial.print("Initial threshold register = 0x"); Serial.println(thresh, HEX);
+
+  thresh_reg.write(~thresh);
+
+  Serial.print("Post threshold register = 0x"); Serial.println(thresh_reg.read(), HEX);
+}
+
+void loop() {
+  
+}