firmware in v1 verschoben

2026-03-21 02:31:16 +01:00 · 2022-01-08 22:41:41 +01:00
parent 9c9b749c2e
commit c0ab45a792
14 changed files with 110 additions and 2 deletions
--- a/include/sensorapi/sensorapi.pde
+++ b/include/sensorapi/sensorapi.pde
@@ -1,132 +0,0 @@
-#include <Wire.h>
-#include <Adafruit_Sensor.h>
-#include <Adafruit_BMP085_U.h>
-
-/* This driver uses the Adafruit unified sensor library (Adafruit_Sensor),
-   which provides a common 'type' for sensor data and some helper functions.
-   
-   To use this driver you will also need to download the Adafruit_Sensor
-   library and include it in your libraries folder.
-
-   You should also assign a unique ID to this sensor for use with
-   the Adafruit Sensor API so that you can identify this particular
-   sensor in any data logs, etc.  To assign a unique ID, simply
-   provide an appropriate value in the constructor below (12345
-   is used by default in this example).
-   
-   Connections
-   ===========
-   Connect SCL to analog 5
-   Connect SDA to analog 4
-   Connect VDD to 3.3V DC
-   Connect GROUND to common ground
-    
-   History
-   =======
-   2013/JUN/17  - Updated altitude calculations (KTOWN)
-   2013/FEB/13  - First version (KTOWN)
-*/
-   
-Adafruit_BMP085_Unified bmp = Adafruit_BMP085_Unified(10085);
-
-/**************************************************************************/
-/*
-    Displays some basic information on this sensor from the unified
-    sensor API sensor_t type (see Adafruit_Sensor for more information)
-*/
-/**************************************************************************/
-void displaySensorDetails(void)
-{
-  sensor_t sensor;
-  bmp.getSensor(&sensor);
-  Serial.println("------------------------------------");
-  Serial.print  ("Sensor:       "); Serial.println(sensor.name);
-  Serial.print  ("Driver Ver:   "); Serial.println(sensor.version);
-  Serial.print  ("Unique ID:    "); Serial.println(sensor.sensor_id);
-  Serial.print  ("Max Value:    "); Serial.print(sensor.max_value); Serial.println(" hPa");
-  Serial.print  ("Min Value:    "); Serial.print(sensor.min_value); Serial.println(" hPa");
-  Serial.print  ("Resolution:   "); Serial.print(sensor.resolution); Serial.println(" hPa");  
-  Serial.println("------------------------------------");
-  Serial.println("");
-  delay(500);
-}
-
-/**************************************************************************/
-/*
-    Arduino setup function (automatically called at startup)
-*/
-/**************************************************************************/
-void setup(void) 
-{
-  Serial.begin(9600);
-  Serial.println("Pressure Sensor Test"); Serial.println("");
-  
-  /* Initialise the sensor */
-  if(!bmp.begin())
-  {
-    /* There was a problem detecting the BMP085 ... check your connections */
-    Serial.print("Ooops, no BMP085 detected ... Check your wiring or I2C ADDR!");
-    while(1);
-  }
-  
-  /* Display some basic information on this sensor */
-  displaySensorDetails();
-}
-
-/**************************************************************************/
-/*
-    Arduino loop function, called once 'setup' is complete (your own code
-    should go here)
-*/
-/**************************************************************************/
-void loop(void) 
-{
-  /* Get a new sensor event */ 
-  sensors_event_t event;
-  bmp.getEvent(&event);
- 
-  /* Display the results (barometric pressure is measure in hPa) */
-  if (event.pressure)
-  {
-    /* Display atmospheric pressue in hPa */
-    Serial.print("Pressure:    ");
-    Serial.print(event.pressure);
-    Serial.println(" hPa");
-    
-    /* Calculating altitude with reasonable accuracy requires pressure    *
-     * sea level pressure for your position at the moment the data is     *
-     * converted, as well as the ambient temperature in degress           *
-     * celcius.  If you don't have these values, a 'generic' value of     *
-     * 1013.25 hPa can be used (defined as SENSORS_PRESSURE_SEALEVELHPA   *
-     * in sensors.h), but this isn't ideal and will give variable         *
-     * results from one day to the next.                                  *
-     *                                                                    *
-     * You can usually find the current SLP value by looking at weather   *
-     * websites or from environmental information centers near any major  *
-     * airport.                                                           *
-     *                                                                    *
-     * For example, for Paris, France you can check the current mean      *
-     * pressure and sea level at: http://bit.ly/16Au8ol                   */
-     
-    /* First we get the current temperature from the BMP085 */
-    float temperature;
-    bmp.getTemperature(&temperature);
-    Serial.print("Temperature: ");
-    Serial.print(temperature);
-    Serial.println(" C");
-
-    /* Then convert the atmospheric pressure, and SLP to altitude         */
-    /* Update this next line with the current SLP for better results      */
-    float seaLevelPressure = SENSORS_PRESSURE_SEALEVELHPA;
-    Serial.print("Altitude:    "); 
-    Serial.print(bmp.pressureToAltitude(seaLevelPressure,
-                                        event.pressure)); 
-    Serial.println(" m");
-    Serial.println("");
-  }
-  else
-  {
-    Serial.println("Sensor error");
-  }
-  delay(1000);
-}